Datalogic RIDA DBT6400 - Standard 2 of 5; Standard 2 of 5 Enable;Disable; Standard 2 of 5 Check Character Calculation

Enter/Exit Programming Mode Standard 2 of 5
166 RIDA™ DBT6400
Standard 2 of 5
The following options apply to the Standard 2 of 5 symbology.
Standard 2 of 5 Enable/Disable
When disabled, the scanner will not read Standard 2 of 5 bar codes.
DEFAULT
Standard 2 of 5 = Disable
Standard 2 of 5 = Enable
Standard 2 of 5 Check Character Calculation
This option enables/disables calculation and verification of an optional Stan-
dard 2 of 5 check character.
DEFAULT
Standard 2 of 5 Check Character Calculation = Disable
Standard 2 of 5 Check Character Calculation = Enable
$CS2EN00
$CS2EN01
$CS2CC00
$CS2CC01