NOTE
The DBT6400 reader can be set up to requi
re a PIN code when connecting. If you
want to set up a PIN, or add new equipment to a system that uses a custom
security PIN, please see " BT Security Features" on page 262.
Setup
10 RIDA™ DBT6400
Bluetooth Unpairing
To unpair the reader and the Host, press and hold the Link button until the blue
LED turns off.
Alternatively, read the following unlink label.
NOTE
Before pairing to another Host, the reader mu
st be unpaired from the previous.
Bluetooth Passkey Request
During the pairing process, based on Host and Reader security settings, you
may need to enter a passkey.
If you let the Host generate the passkey, simply enter the required code by
sca
nning the corresponding bar codes for alphanumeric entry. Complete by
scanning the End label. To restart the entering of the passkey, read the Restart
label.
If, alternatively, you choose to enter on the Host the passkey proposed by the
Re
ader, enter 1234.
Passkey Restart
HID Country Mode
When the Reader is connected with a Bluetooth Application in HID mode, you
may want to set the country for which your Host is localized. Go to "HID Coun-
try Mode" on page 266” and read one of the configuration command labels.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
