Delphin ProfiMessage User Manual

ProfiMessage
Ethernetstand-
ards
10/100Base-T(halfandfullduplex),auto-negotiation
Protocols
TCP/IP,UDP,ICMP,HTTP,SMTP,NTPModbusTCPCli-
ent/Server
Connector RJ45(8-pinconnectorTP)
Galvanicisolation 1.5kVeff
USB interface
Interfacetype USBmaster
Transmissionspeed USB1.0FullSpeed(USB1.1compatible)
Powerforexternaldevices 5Vmax.500mA(HighPower)
Connector USBconnectortypeA
External bus (Ext. BUS)
Interfacetype CAN2.0B,ISO11898-1,ISO11898-2
Baudrate max.1Mbaud
Connector LP-3-pinterminalblock(e.g.Wielandtype8113B/3VL)
Galvanicisolation 1kV
COM1:
Interface
type
RS-485interface
Baudrate max.12Mbaud
Connector 9-pinD-SUBconnector,pinassignmentaccordingtoIEC61158
Galvanic
isolation
1kV(noisolationtoCAN)
Features
Built-inPROFIBUScontrollerhardware1)DPV1slave,redundant
accordingtoPNOdocumentNo.2212V1.2
1)TheidentificationnumberforProfiMessage,asallocatedbytheGerman
PROFIBUSUserOrganization(PNO),is0x09B8.Furtherinformationcanbefound
intheGSDfile.RefertoPROFIBUSGSDfileandPROFIBUSprotocol.
CAN (CAN bus)
221
Delphin Technology AG
Dezember 2015
ProfiMessage Manual

Delphin ProfiMessage Specifications

General

Brand	Delphin
Model	ProfiMessage
Category	Test Equipment
Language	English