Delphin ProfiMessage - Page 222

ProfiMessage
Interface
type
CAN2.0B,ISO11898-1,ISO11898-2
Baudrate max.1Mbaud
Connector
9-pinD-SUBconnector,pinassignmentaccordingtoCiA
DS102-1(pin2andpin7)
Galvanicisol-
ation
1kV(noisolationtoCOM1)
COM2:
Interface
type
RS-485interface
Baudrate max.12Mbaud
Connector 9-pinD-SUBconnector,pinassignmentaccordingtoIEC61158
Galvanic
isolation
1kV(noisolationtoCOM3)
Features
Built-inPROFIBUScontrollerhardware1)DPV1slave,redundant
accordingtoPNOdocumentNo.2212V1.2
1)TheidentificationnumberforProfiMessage,asallocatedbytheGerman
PROFIBUSUserOrganization(PNO),is0x09B8.Furtherinformationcanbefound
intheGSDfile.RefertoPROFIBUSGSDfileandPROFIBUSprotocol.
COM3
Interfacetype RS-232interface
Baudrate max.5Mbaud
Connector 9-pinSub-Dconnector,threepinsused
Galvanicisolation 1kV(noisolationtoCOM2)
COM4:
Interface
type
RS-232interface
Baudrate max.5Mbaud
Connector
9-pinD-SUBconnector,pinassignmentaccordingtoDIN41652,
part1(ISO4902)(suchasPCconnectorassignment)
222
Delphin Technology AG
Dezember 2015
ProfiMessage Manual