Delphin ProfiMessage - Page 284

ProfiMessage

Recording
Choosethesettingforthemainoperatingmode:
Batch:Recording,analysisandmeasurementdatatransfertakesplaceinchro-
nologicalsequence.RefertothesectionBatchrecording.
Continuous:Recording,evaluationandmeasurementdatatransfertakesplacein
parallel.RefertothesectionContinuousrecording.
FFT analysis
Toenable/disableinternalFFTanalysis.Thissettingaffectstheoptionsavailable
ontheRecordingtab.
Transmitted measurement data
Togloballysetwhichofthethreemeasurementdatatypesaretobetransmitted,
irrespectiveofwhetherthecorrespondingchannelshavebeencreatedandareact-
ive.
Simulation
Toenablesignalsimulation.ReferalsotothesectionSignalsimulation.
Triggering tab
284
Delphin Technology AG
Dezember 2015
ProfiMessage Manual