TEST ACTION APPLICABILITY
5 Turn the ignition off.
Disconnect the Seat Belt Switch harness connector.
Measure the resistance of the Seat Belt Switch between the Indicator circuit pin and
the Ground circuit pin.
Is the resistance below 5.0 ohms?
All
Yes → Replace the Instrument Cluster in accordance with the Service
Information.
Perform BODY VERIFICATION TEST - VER 1.
No → Replace the Seat Belt Switch in accordance with the Service
Information.
Perform BODY VERIFICATION TEST - VER 1.
173
INSTRUMENT CLUSTER
*SEATBELT INDICATOR INOPERATIVE — Continued
To Next Page
Loading...
