Dodge 2004 Neon SRT4 - Abs Message Not Received; Acm Message Not Received; Eatx Message Not Received; Sbec Message Not Received

Symptom List:
ABS MESSAGE NOT RECEIVED
ACM MESSAGE NOT RECEIVED
EATX MESSAGE NOT RECEIVED
SBEC MESSAGE NOT RECEIVED
SKIM MESSAGE NOT RECEIVED
Test Note: All symptoms listed above are diagnosed using the same tests.
The title for the tests will be ABS MESSAGE NOT RECEIVED.
When Monitored and Set Condition:
ABS MESSAGE NOT RECEIVED
When Monitored: With the ignition in the Run/Start position.
Set Condition: The Instrument Cluster detects no PCI Bus message from the CAB
module for 12 (twelve) seconds.
ACM MESSAGE NOT RECEIVED
When Monitored: With the ignition in the Run/Start position.
Set Condition: The Instrument Cluster detects no PCI Bus message from the AECM for
5 (five) seconds.
EATX MESSAGE NOT RECEIVED
When Monitored: With the ignition on.
Set Condition: The Instrument Cluster detects no PCI Bus message from the EATX for 5
(five) seconds.
SBEC MESSAGE NOT RECEIVED
When Monitored: With the ignition in the Run/Start position.
Set Condition: The Instrument Cluster detects no PCI Bus message from the SBEC for
20 (twenty) seconds.
SKIM MESSAGE NOT RECEIVED
When Monitored: With the ignition in the Run/Start position.
Set Condition: The Instrument Cluster detects no PCI Bus message from the SKIM
Module for 20 (twenty) seconds.
POSSIBLE CAUSES
BUS MESSAGE NOT RECEIVED DTC PRESENT
INTERMITTENT CONDITION
INSTRUMENT CLUSTER
140
INSTRUMENT CLUSTER