Symptom:
INTERROGATE RIGHT SIACM
When Monitored and Set Condition:
INTERROGATE RIGHT SIACM
When Monitored: With ignition on, the ACM monitors the PCI Bus for a Right SIACM
status message containing the airbag warning indicator On - OFF request. The status
message is sent to the ACM once each second or upon any change in the active DTCs.
Set Condition: The Code will set, if the ACM receives an Lamp On status message from
the Right SIACM. NOTE: This indicates that there is an active diagnostic trouble code in
the Right SIACM.
POSSIBLE CAUSES
INTERROGATE RIGHT SIACM
NO ACTIVE RIGHT SIACM DTCS
STORED CODE OR INTERMITTENT CONDITION
ACTIVE CODE PRESENT
TEST ACTION APPLICABILITY
1 NOTE: Ensure that the battery is fully charged.
Ensure the battery is fully charged.
NOTE: For the purpose of this test, the AECM and ORC modules will be
referred to as an ACM.
SELECT ACTIVE or STORED DTC:
All
ACM - ACTIVE DTC
Go To 2
ACM - STORED DTC
Go To 4
NOTE: When reconnecting Airbag system components, the ignition must be
turned off and the battery must be disconnected.
2 Turn the ignition on.
With the DRBIIIt read the Right SIACM active DTCs.
Did the DRBIIIt show any active DTCs?
All
Yes → Refer to symptom list for problems related to Right SIACM.
Perform AIRBAG VERIFICATION TEST - VER 1.
No → Go To 3
39
AIRBAG
To Next Page
Loading...
