Symptom:
CD CHANGER TEMPERATURE HIGH
When Monitored and Set Condition:
CD CHANGER TEMPERATURE HIGH
When Monitored: Continuously with the ignition and CD Changer turned on.
Set Condition: The code will set if the temperature inside the CD Changer is above +65°
C (+145° F).
POSSIBLE CAUSES
HIGH TEMPERATURE FAILURE
TEST ACTION APPLICABILITY
1 With the DRBIIIt, erase the audio DTC’s.
Start the engine and allow the engine to reach normal operating temperature.
If the vehicle has been in the hot sunlight or extreme cold move the vehicle indoors
and open the doors to allow the inside temperature to stabilize.
The CD Changer will operate between -23° C and 65° C (-10° F and +145° F).
With the DRBIIIt, read DTC’s.
Does the DRBIIIt display CD CHANGER TEMPERATURE HIGH?
All
Yes → Replace the CD Changer.
Perform BODY VERIFICATION TEST - VER 1.
No → Test Complete.
90
AUDIO
To Next Page
Loading...
Need help?
General
