Symptom:
CD PLAY FAILURE
When Monitored and Set Condition:
CD PLAY FAILURE
When Monitored: Continuously with the ignition and the radio CD player turned on.
Set Condition: The code will set if a CD that is not formatted as a music CD or is
scratched, dirty so the radio can not play the CD.
POSSIBLE CAUSES
CD PLAY FAILURE
TEST ACTION APPLICABILITY
1 Replace the problem CD with a good, clean, unscratched, music CD.
Turn the radio CD player on.
With the DRBIIIt, read DTC’s.
Does the DRBIIIt display CD PLAY FAILURE?
All
Yes → Replace the Radio.
Perform BODY VERIFICATION TEST - VER 1.
No → Test Complete.
91
AUDIO
To Next Page
Loading...
Need help?
General
