Symptom:
SEAT SQUIB CIRCUIT OPEN
When Monitored and Set Condition:
SEAT SQUIB CIRCUIT OPEN
When Monitored: With the ignition is On, the SIACM monitors the resistance of the Seat
Squib circuits.
Set Condition: When the SIACM detects an open circuit or high resistance on the Seat
Squib circuits.
POSSIBLE CAUSES
SEAT AIRBAG OPEN
SEAT SQUIB LINE 1 OR LINE 2 CIRCUIT OPEN
SIACM, SEAT SQUIB CIRCUIT OPEN
STORED CODE OR INTERMITTENT CONDITION
ACTIVE CODE PRESENT
TEST ACTION APPLICABILITY
1 Ensure the battery is fully charged.
Turn the ignition on.
NOTE: For the purpose of this test, the AECM and ORC modules will be
referred to as an ACM.
SELECT ONE:
All
LEFT SIACM - ACTIVE DTC
Go To 2
LEFT SIACM - STORED DTC
Go To 4
RIGHT SIACM - ACTIVE DTC
Go To 2
RIGHT SIACM - STORED DTC
Go To 4
NOTE: When reconnecting Airbag system components, the ignition must be
turned off and the battery must be disconnected.
70
AIRBAG
To Next Page
Loading...
Need help?
General
