Dodge 2004 Neon SRT4 - Module Not Configured for Rke

Symptom:
MODULE NOT CONFIGURED FOR RKE
When Monitored and Set Condition:
MODULE NOT CONFIGURED FOR RKE
When Monitored: When the ignition is in the run position during Remote Keyless Entry
transmitter programming.
Set Condition: When the operator attempts to program a transmitter and the RKE
module is not configured for RKE.
POSSIBLE CAUSES
MODULE NOT CONFIGURED FOR RKE
TEST ACTION APPLICABILITY
1 The RKE transmitter will not program because the module is not configured for RKE.
View repair.
All
Repair
Using the DRBIIIt, configure the module for Remote Keyless
Entry.
Perform BODY VERIFICATION TEST - VER 1.
186
POWER DOOR LOCKS/RKE