Symptom:
CD CHANGER MECHANICAL FAILURE
When Monitored and Set Condition:
CD CHANGER MECHANICAL FAILURE
When Monitored: Continuously with the ignition and CD Changer turned on.
Set Condition: The code will set if the CD Changer detects a mechanical failure.
POSSIBLE CAUSES
INTERNAL FAILURE
TEST ACTION APPLICABILITY
1 NOTE: Erase DTC and attempt to reset. If DTC resets, follow this test.
This is an internal CD Changer failure.
View repair
All
Repair
Replace the CD Changer.
Perform BODY VERIFICATION TEST - VER 1.
88
AUDIO
To Next Page
Loading...
