Symptom:
NO PCI TRANSMISSION
When Monitored and Set Condition:
NO PCI TRANSMISSION
When Monitored: With the ignition on and the module transmitting information on the
PCI BUS.
Set Condition: The code will set if the onboard diagnostic cannot detect the module
transmitting information on the PCI BUS for 4 consecutive seconds. NOTE: Any PCI Bus
Failure will may cause a stored code to set.
POSSIBLE CAUSES
AIRBAG CONTROL MODULE - ACM
LEFT SIDE IMPACT AIRBAG CONTROL MODULE - LSIACM
RIGHT SIDE IMPACT AIRBAG CONTROL MODULE - RSIACM
STORED CODE OR INTERMITTENT CONDITION
ACTIVE CODE PRESENT
53
AIRBAG
To Next Page
Loading...
