Symptom:
*ALL DOORS EXCEPT DRIVER FAIL TO UNLOCK
POSSIBLE CAUSES
DOOR UNLOCK RELAY OUTPUT CIRCUIT SHORT TO GROUND
REMOTE KEYLESS ENTRY MODULE - UNLOCK RELAY
TEST ACTION APPLICABILITY
1 Turn the ignition off.
Disconnect the Remote Keyless Entry module connector.
Measure the resistance between ground and the Door Unlock Relay Output circuit.
Is the resistance below 1000.0 ohms?
All
Yes → Repair the Door Unlock Relay Output circuit for a short to
ground.
Perform BODY VERIFICATION TEST - VER 1.
No → Replace the Remote Keyless Entry Module.
Perform BODY VERIFICATION TEST - VER 1.
197
POWER DOOR LOCKS/RKE
To Next Page
Loading...
Need help?
General
