Symptom List:
P0300-MULTIPLE CYLINDER MISFIRE
P0301-CYLINDER #1 MISFIRE
P0302-CYLINDER #2 MISFIRE
P0303-CYLINDER #3 MISFIRE
P0304-CYLINDER #4 MISFIRE
Test Note: All symptoms listed above are diagnosed using the same tests.
The title for the tests will be P0300-MULTIPLE CYLINDER
MISFIRE.
When Monitored and Set Condition:
P0300-MULTIPLE CYLINDER MISFIRE
When Monitored: Any time the engine is running, and the Target Learning Coefficient
has been successfully updated.
Set Condition: When more than a 1.0% misfire rate is measured during two trips.
P0301-CYLINDER #1 MISFIRE
When Monitored: Any time the engine is running, and the Target Learning Coefficient
has been successfully updated.
Set Condition: When more than a 1.0% misfire rate is measured during two trips.
P0302-CYLINDER #2 MISFIRE
When Monitored: Any time the engine is running, and the Target Learning Coefficient
has been successfully updated.
Set Condition: When more than a 1.0% misfire rate is measured during two trips.
P0303-CYLINDER #3 MISFIRE
When Monitored: Any time the engine is running, and the Target Learning Coefficient
has been successfully updated.
Set Condition: When more than a 1.0% misfire rate is measured during two trips.
P0304-CYLINDER #4 MISFIRE
When Monitored: Any time the engine is running, and the Target Learning Coefficient
has been successfully updated.
Set Condition: When more than a 1.0% misfire rate is measured during two trips.
POSSIBLE CAUSES
INTERMITTENT MISFIRE
VISUAL AND PHYSICAL INSPECTION
122
DRIVEABILITY - NGC
To Next Page
Loading...
