TEST ACTION APPLICABILITY
3 Turn the ignition off.
Remove the Crankshaft Position Sensor.
Inspect the Tone Wheel/Flex Plate slots for damage, foreign material, or excessive
movement.
Were any problems found?
All
Yes → Repair or replace the Tone Wheel/Flex Plate as necessary.
Perform POWERTRAIN VERIFICATION TEST VER-5-NGC.
No → Go To 4
4 If there are no possible causes remaining, view repair. All
Repair
Replace the Crankshaft Position Sensor.
Perform POWERTRAIN VERIFICATION TEST VER-5-NGC.
131
DRIVEABILITY - NGC
P0315-NO CRANK SENSOR LEARNED — Continued
To Next Page
Loading...
