Technical data
162 Operating Instructions 867 - 04.0 - 03/2018
11.3 Characteristics
The machine is a flatbed sewing machine for double lockstitches.
General technical characteristics
• Large (L) or extra-large (XXL) vertical hook
• Transport: Bottom feed, needle transport and alternating foot-
top feed
• DC drive for all subclasses
• Safety snap-on coupling for preventing any misadjustment of
or damage to the hook in the event of a thread jamming
• Automatic wick lubrication for machine and hook with oil level
indicator on the column
• Maximum passage with lifted sewing feet: 20 mm
• Remaining thread length with automatic thread cutter
approx. 15 mm and 5 mm with short thread cutter
Characteristics of the individual subclasses
Depending on the respective subclass, the product is available
• as a 1-needle or 2-needle machine
• with or without an edge cutter
• with or without an automatic thread cutter
• with or without push buttons on the machine arm and favorite
button for quick functions
• a 2-way additional button for the functions of binder differentiation
or switching the needle bars can be added for machines
equipped with a thread cutter
• possible needle spacing for machines with thread cutter:
3-50 mm
• possible needle spacing for machines without thread cutter:
3-60 mm
• DLC coating of needle bar, presser foot bar and feeding foot
bar for oil-reduced operation
• slip coating of throat plate and throat plate slide for reduced
friction
• integrated LED sewing lamp depending on class
To Next Page
Loading...
Need help?
General
