DURKOPP ADLER 867 Durkopp Adler

Setup
Operating Instructions 867 - 04.0 - 03/2018 97
7Setup
7.1 Checking the scope of delivery
The scope of delivery depends on your specific order.
Check that the scope of delivery is correct after taking delivery.
7.2 Removing the transport locks
All transport locks must be removed prior to setup:
• All lashing straps and wooden blocks from the machine head,
the table and the stand
• Supporting wedges between machine arm and throat plate
WARNING
Risk of injury from cutting parts!
Cutting injuries may be sustained while
unpacking and setting up the machine.
Only qualified specialists may set up the machine.
Wear safety gloves
WARNING
Risk of injury from moving parts!
Crushing injuries may be sustained while
unpacking and setting up the machine.
Only qualified specialists may set up the machine.
Wear safety shoes.

DURKOPP ADLER 867 Specifications

General

Stitch Type	Lockstitch
Max Stitch Length	12 mm
Needle System	134-35
Needle Thread Tension	Adjustable
Lubrication	Automatic
Type	Industrial Sewing Machine
Max Sewing Speed	3000 stitches per minute
Presser Foot Lift	20 mm
Power Requirements	230V/50Hz