DURKOPP ADLER 867 Durkopp Adler

Operation
74 Operating Instructions 867 - 04.0 - 03/2018
Sewing an intermediate bartack
1. Reverse sewing with the stitch adjustment lever or the quick
function button ( p. 64 or  p. 72).
Finishing the seam
1. Press the pedal back completely in pedal position -2:
 The machine sews the end bartack, and the thread cutter
cuts the thread.
The machine stops, needles and sewing feet are up.
2. Remove the sewing material.
4.21 Sewing backwards
The stitch adjustment lever on the machine arm reduces the stitch
length down to sewing backwards in the lower end position.
Fig. 41: Sewing backwards
To sew backwards:
1. Slowly push the stitch adjustment lever (1) down.
 The stitch length becomes smaller. In the lower end position,
the machine sews in reverse with the stitch length currently
set at the adjusting wheels.
(1) - Stitch adjustment lever
①

DURKOPP ADLER 867 Specifications

General

Stitch Type	Lockstitch
Max Stitch Length	12 mm
Needle System	134-35
Needle Thread Tension	Adjustable
Lubrication	Automatic
Type	Industrial Sewing Machine
Max Sewing Speed	3000 stitches per minute
Presser Foot Lift	20 mm
Power Requirements	230V/50Hz