DURKOPP ADLER 867 - Setting the Hook Thread Tension

Operation
48 Operating Instructions 867 - 04.0 - 03/2018
4.8.4 Setting the hook thread tension
Fig. 22: Setting the hook thread tension
The hook thread tension is adjusted using the adjusting screw (1).
To increase the hook thread tension:
1. Turn the adjusting screw (1) clockwise.
To reduce the hook thread tension:
1. Turn the adjusting screw (1) counterclockwise
WARNING
Risk of injury from moving, cutting or sharp
parts!
Crushing, cutting and punctures are possible.
Switch off the machine before you set the hook
thread tension.
(1) - Adjusting screw
①