DURKOPP ADLER 867 - Permissible Maximum Speeds; Stitch Length; Stitch Lengths

Technical data
Operating Instructions 867 - 04.0 - 03/2018 163
Subclasses with integrated motor
Subclasses with the -M suffix have a direct drive mounted on
the arm shaft. The control is built into the motor cover on ECO
machines. CLASSIC machines have a separate control under the
tabletop.
Subclasses of long arm machines
The subclasses of long arm machines have suffixes of -70 or
-100, which specify the length of the arm throat in cm.
11.4 Permissible maximum speeds
To ensure safe operation, optimum sewing results and a long
service life of the machine, do NOT exceed the permissible
maximum speeds:
1-needle machines with large hook (L)
Subclasses: 867-
-160122 -190020 ECO -190122 -190125 -190322 -190425 -190426
Stitch
length 0-6
Stroke 1-3 3800 3000 3800 3800 3800 3800 3800
Stroke 4 3100 3000 3100 3100 3100 3100 3100
Stroke 5 2500 2500 2500 2500 2500 2500 2500
Stroke 6-9 1800 1800 1800 1800 1800 1800 1800
Stitch
length 6-9
Stroke 1-4 3000 3000 3000 3000 3000 3000
Stroke 5 2500 2500 2500 2500 2500 2500
Stroke 6-9 1800 1800 1800 1800 1800 1800
Stitch
length 9-12
Stroke 1-5 2000 2000 2000 2000 2000 2000
Stroke 6-9 1800 1800 1800 1800 1800 1800