To Next Page

To Previous Page

Maintenance

92 Operating Instructions 867 - 04.0 - 03/2018

To set the hook lubrication:

1. Turn the screw:

• counterclockwise: more oil is released

• clockwise: less oil is released

Important

The released amount of oil does not change until the operating

time has run a few minutes. Sew for several minutes before you

check the setting again.

6.4 Servicing the pneumatic system

6.4.1 Setting the operating pressure

Proper setting

Refer to the Technical data ( p. 149) chapter for the permissi-

ble operating pressure. The operating pressure cannot deviate by

more than ± 0.5 bar.

Check the operating pressure on a daily basis.

NOTICE

Property damage from incorrect setting!

Incorrect operating pressure can result in damage to the

machine.

Ensure that the machine is only used when the operating

pressure is set correctly.

DURKOPP ADLER 867 Durkopp Adler

Other manuals for DURKOPP ADLER 867