Operation
Operating Instructions 867 - 04.0 - 03/2018 67
To assign a function to the favorite button:
1. Turn all screws (2) so that the slots are horizontal.
2. Turn the screw (2) under the button of the function you wish
to assign to the favorite button (1) in such a way that its slot
is in the vertical position.
You can now use both the buttons (3)/(4)/(5)/(6)/(7)/(8) and
the favorite button (1) to call up this function.
4.16 Switching the binder
On machines equipped with a binder the buttons + and - above
the needle bar define the path followed by the binder.
Fig. 37: Switching the binder
• No button pressed:
The binder follows the same path as the feed dog.
• Plus button pressed: Bind an outer bow
The binder follows a longer path.
• Minus button pressed: Bind an inner bow
The binder follows a shorter path.
When the machine is switched on, the binder always follows the
same path as the feed dog - regardless of which button was
pressed before the machine was switched off.
(1) - Plus button (2) - Minus button
To Next Page
Loading...
Need help?
General
