DURKOPP ADLER 867 Durkopp Adler

Operation
68 Operating Instructions 867 - 04.0 - 03/2018
To increase or reduce the path of the binder:
1. Press the plus or minus button.
 The pressed button lights up.
The binder follows a larger or smaller path than the feed dog.
2. Press the currently illuminated button again.
 The button does not light up any more.
The binder follows the same path as the feed dog.
Information
You cannot directly switch between plus and minus.
Deactivate the respectively illuminated button as described in
step 2 before switching to the other button.

DURKOPP ADLER 867 Specifications

General

Stitch Type	Lockstitch
Max Stitch Length	12 mm
Needle System	134-35
Needle Thread Tension	Adjustable
Lubrication	Automatic
Type	Industrial Sewing Machine
Max Sewing Speed	3000 stitches per minute
Presser Foot Lift	20 mm
Power Requirements	230V/50Hz