Setup
108 Operating Instructions 867 - 04.0 - 03/2018
7.9 Assembling the control panel
Fig. 60: Assembling the control panel (1)
To assemble the control panel:
1. Unscrew the machine cover (1) and the valve cover (2).
2. Tighten the control panel (5) on the control panel bracket (4).
(1) - Upper machine cover
(2) - Valve cover
(3) - Cable duct (only for long arm;
not visible here)
(4) - Control panel bracket
(5) - Control panel
To Next Page
Loading...
