DURKOPP ADLER 867 - Buttons on the OP1000 Control Panel

Programming
78 Operating Instructions 867 - 04.0 - 03/2018
Information
This chapter describes the machine-specific functions of the
OP1000 control panel.
Refer to the  Instructions for use DAC basic/classic for further
information on the control and the OP1000 control panel.
5.1.1 Buttons on the OP1000 control panel
Fig. 43: Buttons on the OP1000 control panel
(1) - Power LED
(2) - Thread button group
(3) - Function button
(4) - Programming button group
(5) - Seam program button group
(6) - LED for 2nd Stitch length
(7) - Display
②
③④ ⑤
②
⑥
⑦①