Operation
26 Operating Instructions 867 - 04.0 - 03/2018
Information
• In 1-needle machines:
The thread reel carrying the needle thread belongs on the left
plate. The thread reel carrying the hook thread belongs on the
right plate.
• In 2-needle machines:
The thread reels carrying the left and the right needle thread
belong, respectively, on the left and the right plate (2) of the left
thread reel holder (3).
The thread reel carrying the hook thread belongs on a plate (2)
fitted on the right thread reel holder (3) (not shown in the figure).
2. Thread the needle thread at the unwinding bracket from the
rear to the front.
3. Insert the needle thread ( p. 27 or p. 32).
You can now thread needle and hook thread ( p. 27 and
p. 41) and set the thread tension ( p. 43).
To Next Page
Loading...
