Operation
Operating Instructions 867 - 04.0 - 03/2018 53
4.11 Locking the sewing feet at top dead center
There is a lever at the back of the machine which can be used to
hold the sewing feet at top dead center.
Fig. 27: Locking the sewing feet at top dead center
To lock the sewing feet at top dead center:
1. Swivel the lever (1) down.
The sewing feet are locked at top dead center.
2. Swivel the lever (1) up.
Top dead center is canceled.
CAUTION
Risk of injury from moving parts!
Risk of crushing when lowering the sewing foot.
Do not reach under the sewing feet.
(1) - Lever
To Next Page
Loading...
