EDAN U60 - Page 112

U60 Diagnostic Ultrasound System User Manual Operation
- 104 -
Set repeatedly to cycle between JPG, BMP, FRM and DCM (if DICOM is installed).
To save a file:
The system provides two ways to save images:
 Press Store Image or Store Clip on thecontrol pannel;
Press Store Image on the control pannel to save the current displaying image in BMP, JPG,
FRM or DCM (if DICOM is installed) format (set by File Type in the file menu, as shown
above).
Press Store Clip on the control panel to save the clip to a required format (set by File Type
in the file menu, as shown above).
 Use Snapshot, Save Frame, Save Cine, Save AVI, or Save As of the file menu to save files.
 Snapshot
Highlight Snapshot in the file menu and press Set to save the current displaying image in
BMP, JPG, FRM or DCM (if DICOM is installed) format (set by File Type in the file
menu, as shown above).
 Save Frame
1. Press Freeze to freeze the system;
2. Play back and find the desired image;
3. Press File to open the file menu;
4. Highlight Save Frame in the file menu, and press Set to save the current displaying
image.
 Save Cine
1. Press Freeze to freeze the system;
2. Press File to open the file menu;
3. Highlight Save Cine in the file menu, and press Set.
 Save AVI
1. Press Freeze to freeze the system;
2. Press File to open the file menu;
3. Highlight Save AVI in the file menu, and press Set.
NOTE:
The AVI files can not be viewed on this system; please use a USB disk to copy the AVI
files to a PC, and view them by using video players.