Epson S1D13706 - Figure 11-1: 1 Bit-Per-Pixel Monochrome Mode Data Output Path; Figure 11-2: 2 Bit-Per-Pixel Monochrome Mode Data Output Path; Look-Up Table Architecture; Monochrome Modes

Page 132
Epson Research and Development
Vancouver Design Center
S1D13706 Hardware Functional Specification
X31B-A-001-08 Issue Date: 01/11/13
11 Look-Up Table Architecture
The following figures are intended to show the display data output path only.
Note
When Video Data Invert is enabled the video data is inverted after the Look-Up Table.
11.1 Monochrome Modes
The green Look-Up Table (LUT) is used for all monochrome modes.
1 Bit-per-pixel Monochrome Mode
Figure 11-1: 1 Bit-per-pixel Monochrome Mode Data Output Path
2 Bit-per-pixel Monochrome Mode
Figure 11-2: 2 Bit-per-pixel Monochrome Mode Data Output Path
Green Look-Up Table 256x6
00
01
1 bit-per-pixel data
6-bit Gray Data
from Display Buffer
= unused Look-Up Table entries
00
01
FC
FD
FE
FF
Green Look-Up Table 256x6
00
01
2 bit-per-pixel data
6-bit Gray Data
from Display Buffer
10
11
= unused Look-Up Table entries
00
01
02
03
FC
FD
FE
FF