Epson S1D13706 - Figure 13-1: Picture-In-Picture Plus with Swivelview Disabled

Epson Research and Development
Page 143
Vancouver Design Center
Hardware Functional Specification S1D13706
Issue Date: 01/11/13 X31B-A-001-08
13 Picture-in-Picture Plus (PIP
+
)
13.1 Concept
Picture-in-Picture Plus enables a secondary window (or PIP
+
window) within the main
display window. The PIP
+
window may be positioned anywhere within the virtual display
and is controlled through the PIP
+
window control registers (REG[7Ch] through
REG[91h]). The PIP
+
window retains the same color depth and SwivelView orientation as
the main window.
The following diagram shows an example of a PIP
+
window within a main window and the
registers used to position it.
Figure 13-1: Picture-in-Picture Plus with SwivelView disabled
PIP
+
window
main-window
PIP
+
window y start position
panel’s origin
PIP
+
window y end position
PIP
+
window x start position
PIP
+
window x end position
0° SwivelView
TM
(REG[85h],REG[84h])
(REG[8Dh],REG[8Ch])
(REG[91h],REG[90h])
(REG[89h],REG[88h])