Epson Research and Development
Page 7
Vancouver Design Center
Interfacing to the Intel StrongARM SA-1110 Microprocessor S1D13706
Issue Date: 02/06/26 X31B-G-019-02
1 Introduction
This application note describes the hardware and software environment required to provide
an interface between the S1D13706 Embedded Memory LCD Controller and the Intel
StrongARM SA-1110 Microprocessor.
The designs described in this document are presented only as examples of how such
interfaces might be implemented. This application note is updated as appropriate. Please
check the Epson Research and Development website at www.erd.epson.com for the latest
revision of this document before beginning any development.
We appreciate your comments on our documentation. Please contact us via email at
documentation@erd.epson.com.
To Next Page
Loading...