Epson S1D13706 - Table 4-9: Host Bus Interface Pin Mapping

Page 30
Epson Research and Development
Vancouver Design Center
S1D13706 Hardware Functional Specification
X31B-A-001-08 Issue Date: 01/11/13
4.6 Host Bus Interface Pin Mapping
Note
1
A0 for these busses is not used internally by the S1D13706 and should be connected to V
SS
.
2
If the target MC68K bus is 32-bit, then these signals should be connected to D[31:16].
Table 4-9: Host Bus Interface Pin Mapping
S1D13706
Pin Name
Generic #1 Generic #2
Hitachi
SH-3 /SH-4
Motorola
MC68K #1
Motorola
MC68K #2
Motorola
REDCAP2
Motorola
MC68EZ328/
MC68VZ328
DragonBall
AB[16:1] A[16:1] A[16:1] A[16:1] A[16:1] A[16:1] A[16:1] A[16:1]
AB0 A0
1
A0 A0
1
LDS# A0 A0
1
A0
1
DB[15:0] D[15:0] D[15:0] D[15:0] D[15:0] D[15:0]
2
D[15:0] D[15:0]
CS# External Decode CSn# External Decode CSn
CSX
M/R# External Decode
CLKI BUSCLK BUSCLK CKIO CLK CLK CLK CLKO
BS# Connected to V
DD
BS# AS# AS# Connected to V
DD
RD/WR# RD1#
Connected to
V
DD
RD/WR# R/W# R/W# R/W
Connected to
V
DD
RD# RD0# RD# RD#
Connected to
V
DD
SIZ1 OE OE
WE0# WE0# WE# WE0#
Connected to
V
DD
SIZ0 EB1 LWE
WE1# WE1# BHE# WE1# UDS# DS# EB0 UWE
WAIT# WAIT# WAIT#
WAIT#/
RDY#
DTACK# DSACK1# N/A DTACK
RESET# RESET# RESET# RESET# RESET# RESET# RESET_OUT RESET