Epson S1D13706 - 2 Features

Page 8
Epson Research and Development
Vancouver Design Center
S1D13706 S5U13706B00C Rev. 1.0 Evaluation Board User Manual
X31B-G-004-04 Issue Date: 01/02/23
2 Features
Following are some features of the S5U13706B00C Rev. 1.0 Evaluation Board:
• 100-pin TQFP S1D13706F00A Embedded Memory LCD Controller with 80K bytes of
embedded SRAM.
• Headers for connecting to various Host Bus Interfaces.
• Configuration options.
• Manual or software adjustable positive LCD bias power supply from +20V to +40V.
• Manual or software adjustable negative LCD bias power supply from -24V to -8V.
• Software adjustable backlight intensity support.
• 4/8-bit 3.3V or 5V single monochrome passive LCD panel support.
• 4/8/16-bit 3.3V or 5V single color passive LCD panel support.
• 9/12/18-bit 3.3V or 5V active matrix TFT LCD panel support.
• Direct interface for 18-bit Epson D-TFD LCD panel support.
• Direct interface for 18-bit Sharp HR-TFT LCD panel support.
• Programmable clock synthesizer to CLKI and CLKI2 for maximum clock flexibility.
• Software initiated power save mode.
• Hardware or software Video Invert support.
• Selectable clock source for CLKI and CLKI2.
• External oscillator for CLKI and CLKI2.