Epson Research and Development
Page 7
Vancouver Design Center
Connecting to the Epson D-TFD Panels S1D13706
Issue Date: 01/02/23 X31B-G-012-03
1 Introduction
This application note describes the hardware and software required to connect the
S1D13706 to two Epson D-TFD (Digital Thin Film Diode) panels, the 320 x 240 LF37SQT
and the 160 x 240 LF26SCT.
The designs described in this document are presented only as examples of how such
interfaces might be implemented. This application note is updated as appropriate. Please
check the Epson Electronics America website at www.eea.epson.com for the latest revision
of this document before beginning any development.
We appreciate your comments on our documentation. Please contact us via email at
documentation@erd.epson.com.
To Next Page
Loading...