Page 14
Epson Research and Development
Vancouver Design Center
S1D13706 Connecting to the Epson D-TFD Panels
X31B-G-012-03 Issue Date: 01/02/23
3 S1D13706 to D-TFD Panel Pin Mapping
The S1D13706 outputs and the external signals are sent to the D-TFD panels through two
flat cable connectors. A 30-pin connector is used for the horizontal drivers and a 12-pin
connector for the vertical drivers. Both D-TFD panels use the same horizontal 30-pin
connector, but their vertical driver connectors are different. The 320x240 LF37SQT
connector pins are swapped compared to the 160x240 LF26SCT panel connector.The
following tables provide pin mapping for the various connectors.
To Next Page
Loading...