Epson Research and Development
Page 9
Vancouver Design Center
Programming Notes and Examples S1D13706
Issue Date: 01/02/23 X31B-G-003-03
1 Introduction
This guide provides information on programming the S1D13706 Embedded Memory LCD
Controller. Included are algorithms which demonstrate how to program the S1D13706.
This guide discusses Power-on Initialization, Panning and Scrolling, LUT initialization,
LCD Power Sequencing, SwivelView™, Picture-In-Picture Plus, etc. The example source
code referenced in this guide is available on the web at www.eea.epson.com or
www.erd.epson.com.
This guide also introduces the Hardware Abstraction Layer (HAL), which is designed to
simplify the programming of the S1D13706. Most SED135x and SED137x products have
HAL support, thus allowing OEMs to do multiple designs with a common code base.
This document will be updated as appropriate. Please check the Epson Electronics America
Website at www.eea.epson.com for the latest revision of this document and source before
beginning any development.
We appreciate your comments on our documentation. Please contact us via email at
documentation@erd.epson.com.
To Next Page
Loading...