Epson Research and Development
Page 17
Vancouver Design Center
13706CFG Configuration Program S1D13706
Issue Date: 01/03/29 X31B-B-001-03
TFT/FPFRAME (lines) These settings allow fine tuning of the TFT frame pulse
parameters and are only available when the selected
panel type is TFT/D-TFD/HR-TFT. Refer to S1D13706
Hardware Functional Specification, document number
X31B-A-001-xx, for a complete description of the
FPFRAME pulse settings.
Start pos - Specify the delay (in lines) from the start of
the vertical non-display period to the leading edge of the
FPFRAME pulse.
Pulse width - Specifies the pulse width (in lines) of the
FPFRAME output signal.
Predefined Panels 13706CFG uses a file (panels.def) which lists various
panel manufacturers recommended settings. If the file
panels.def is present in the same directory as
13706cfg.exe, the settings for a number of predefined
panels are available in the drop-down list. If a panel is
selected from the list, 13706CFG loads the predefined
settings contained in the file.
To Next Page
Loading...