Epson Research and Development
Page 5
Vancouver Design Center
13706SHOW Demonstration Program S1D13706
Issue Date: 01/02/23 X31B-B-002-03
/? Displays the help screen.
Test Only Switches
(The following switches were added for testing and validation. They are not supported
at the customer level.)
/bigmem Assumes memory size is 2M bytes instead of 80K bytes
(for testing purposes only).
/noclkerr Allows invalid SwivelView clock settings
(for testing purposes only).
/read After drawing the image, continually reads the entire
display buffer in dword increments
(for testing purposes only).
/write Continually writes to one word of offscreen memory
(for testing purposes only).
Note
Pressing the Esc key will exit the program.
To Next Page
Loading...