Epson S1D13706 - Page 301

Epson Research and Development
Page 9
Vancouver Design Center
13706PLAY Diagnostic Utility S1D13706
Issue Date: 01/02/23 X31B-B-003-02
X index [data]
Writes byte data to the register at index. If no data is specified, reads the 8-bit (byte) data
from the register at index.
Where:
index Index into the registers (hex).
data Data to be written to/read from register (hex). Data can be a
list of bytes to be repeated for the duration of the write. To
use decimal values, attach a “t” suffix to the value (e.g. 100t
is 100 decimal). To use binary values attach a “‘b” suffix to
the value (e.g. 0111‘b).
XA
Reads all the S1D13706 registers.
XD index [data]
Writes dword data to the register at index. If no data is specified, reads the 32-bit (dword)
data from the register at index.
Where:
index Index into the registers (hex).
data Data to be written to/read from register (hex). Data can be a
list of dwords to be repeated for the duration of the write. To
use decimal values, attach a “t” suffix to the value (e.g. 100t
is 100 decimal). To use binary values attach a “‘b” suffix to
the value (e.g. 0111‘b).
XW index [data]
Writes word data to the register at index. If no data is specified, reads the 16-bit (word) data
from the register at index.
Where:
index Index into the registers (hex).
data Data to be written to/read from register (hex). Data can be a
list of words to be repeated for the duration of the write. To
use decimal values, attach a “t” suffix to the value (e.g. 100t
is 100 decimal). To use binary values attach a “‘b” suffix to
the value (e.g. 0111‘b).
?
Displays the help screen.