Epson Research and Development
Page 3
Vancouver Design Center
Wind River WindML v2.0 Display Drivers S1D13706
Issue Date: 01/04/06 X31B-E-002-03
Wind River WindML v2.0 DISPLAY DRIVERS
The Wind River WindML v2.0 display drivers for the S1D13706 Embedded Memory LCD
Controller are intended as “reference” source code for OEMs developing for Wind River’s
WindML v2.0. The driver package provides support for both 8 and 16 bit-per-pixel color
depths. The source code is written for portability and contains functionality for most
features of the S1D13706. Source code modification is required to provide a smaller, more
efficient driver for mass production.
The WindML display drivers are designed around a common configuration include file
called mode0.h which is generated by the configuration utility 13706CFG. This design
allows for easy customization of display type, clocks, decode addresses, rotation, etc. by
OEMs. For further information on 13706CFG, see the 13706CFG Configuration Program
User Manual, document number X31B-B-001-xx.
Note
The WindML display drivers are provided as “reference” source code only. They are in-
tended to provide a basis for OEMs to develop their own drivers for WindML v2.0.
These drivers are not backwards compatible with UGL v1.2. For information on the
UGL v1.2 display drivers, see Wind River UGL v1.2 Display Drivers, document number
X31B-E-003-xx.
This document and the source code for the WindML display drivers is updated as appro-
priate. Please check the Epson Electronics America website at http://www.eea.epson.com
or the Epson Research and Development website at http://www.erd.epson.com for the latest
revisions before beginning any development.
We appreciate your comments on our documentation. Please contact us via email at
documentation@erd.epson.com.
To Next Page
Loading...
