EPSON Stylus Pro 9000
Adjustments 114
Record: Maintenance menu
See the description of Maintenance Record items in Table 5-6
on the next
page.
[SelecType]
[Paper Source]
Fire B: XXXX
Fire C: XXXX
Fire M: XXXX
Fire Lc: XXXX
Fire Lm: XXXX
Fire Y: XXXX
Cut: XXXX
Cut Solen XXXX
Lock Solen XXXX
Waste Ink R: XXXX
Waste Ink L: XXXX
HeadWiper R: XXXX
HeadWiper L: XXXX
Wiper XXXX
HeadRubingR XXXX
Rubbing XXXX
Lever XXXX
Cover XXXX
HeadRubingL XXXX
Ink Lever R: XXXX
Ink Lever L: XXXX
CR Motor XXXX
PF Motor XXXX
Ink Tube XXXX
PrintNumber XXXX
Cleaning XXXX
Table 5-6. Maintenance Record Items
Item Description
Fire x Amount of ink fired from nozzles in number of megadots (x =
which color)
Cut Number of times cutter has been used
Cutter Solenoid Number of times cutter solenoid has operated
Lock Solenoid Number of times CR lock solenoid has been used
Waste Ink R/L Amount of waste ink (right or left)
Head Wiper R/L Number of times head wiping operation has occurred
Wiper Number of times wiper has been used
Head Rubbing R/L Number of times B/C head rubbing operation has occurred
Rubbing Number of times rubbing pad has been used
Lever Number of times paper has been set (up and down = one time)
Cover Number of times front cover has been opened (open and close
= one time)
Ink Lever R/L Number of times I/C Holder has been opened (open and close
= one time)
CR Motor Accumulated travel distance of carriage (in Km)
PF Motor Accumulated travel distance of paper feed mechanism (in Km)
Print Number Accumulated printout count (each form-feed code = one unit)
Cleaning Accumulated number of cleaning operations
To Next Page
Loading...
Need help?
General