EPSON Stylus Pro 9000
Maintenance 142
Wiper Wiper
Head Rubbing R/L
Rubbing
Cut (cutter blade) Cutter Life
Cutter Solenoid
Lock Solenoid
Capping Mechanism
Serial Number
PF Resolution
NVRAM
Initial Charge Flag
Periodic Pseudo-Vacuum Flag
Firmware Version
NOTE:
To enter the Self-Diagnostic Mode, press Paper Feed Down + Cut/Eject + Cleaning while turning on the printer.
To enter Maintenance Mode 2, press Paper Source + Cut/Eject + Paper Feed Down while turning on the printer.
To view the Printer Status Menu, press the SelecType button when the printer is turned on but not printing. Press SelecType repeatedly until “Printer Status Menu”
appears. Press the Item button to select the item you want to view.
Table 6-4. Summary of Ways to Check and Clear Maintenance Counters (continued)
Ways to Check Counters Ways to Clear Counters
Self-Diagnostics: Test \ Elec.
(see Table 5-6
on page 114)
Printer Status Menu
(see Table 1-7
on page 15)
Self-Diagnostics: Adjustments \
Counter Clear (resets
all
the
following counters); see Table
5-11 on page 128
Maintenance Mode 2 (see Table
1-12 on page 17)
Self-Diagnostics: Parameter \
Initialize (see Table 5.3.7
on
page 129)
To Next Page
Loading...
Need help?
General