Esser 8000C - Page 56

Page 56
Fire Alarm Computer 8000C / M
The complete expansion of the FACP 8000C includes a basic module, the power supply module
and a field device module with additional slots for micro modules. In the full configuration, two
freely selectable micro modules can be employed.
Basic module
and
power supply module
battery bag
On the basic module of the FACP 8000C, only the upper slot (slot 1) can be used for a field device
or extension module. The lower slot (slot 2) of the FACP 8000C is not used.
Power supply module
A
B
C
Plug 1
Basic module
Fig. 4:Configuration options (FACP 8000C)
A
Field device module Part No. 772420
B
Field device module with one micromodule slot Part No. 772418
C
Extension module with one micromodule slot Part No. 772419
Additional devices
The panel configuration may be extended by additional In-/Output modules (esserbus
®
-
transponders). It is possible to install these transponders inside the panel housing (depending on
available space) or remote from the panel together with available mounting boxes (IP-rating 50).
C
onfiguration options FACP 8000C