evertz 3025EMC - Figure 6-11: SNMP Event Groups

3025EMC Master Control Switching & Channel Branding
Page 136 Revision 3.0.3
Value: This is the value you are setting to the OID of the product’s MIB.
6.3.5.4. SNMP Event Group
The SNMP Event Group window will show the user to group a number of SNMP events into a single
group. This Event Group can be triggered directly from the QMC-DCP.
Figure 6-11: SNMP Event Groups

Note: There is a MAXIMUM of 25 SNMP Event Groups that can be configured.