evertz 3025EMC - Electro Static Discharge (Esd) Precautions; Figure 2-11: QMC-CP-1000 E Control Panel; Figure 2-12: QMC-CP-E Control Panel; Figure 2-13: QMC-CP-2048 E Control Panel

3025EMC Master Control Switching & Channel Branding
Revision 3.0.3 Page 25
See section 6.3.1 for more information on the operation of the CP-1000E Control Panel.
Figure 2-11: QMC-CP-1000E Control Panel
Figure 2-12: QMC-CP-E Control Panel
Figure 2-13: QMC-CP-2048E Control Panel
2.13. ELECTRO STATIC DISCHARGE (ESD) PRECAUTIONS
All semiconductor devices are sensitive to ESD. To prevent any damage or
deg
radation on components of the product caused by ESD, observe these
precautions when installing or removing modules from the frame.
1. Use a Safe Work Area. Avoid handling modules in areas that have a floor or work surface covering
capable of generating a static charge. Also nothing capable of generating or holding a static charge
should be allowed in the work area.
2. Handle ESD sensitive modules carefully. Do not slide modules over any surface. Do not touch
exposed connector pins. Pick-up modules by the edges of the modules, never by touching exposed
leads.
3. Transport and store sensitive components or assemblies in a static-protected bag or container.