evertz 3025EMC - Using Aux for Audio Monitoring; Figure 4-12: Routed From Drop down Window; Figure 4-13: Configuring the Audio Monitoring Routing

3025EMC Master Control Switching & Channel Branding
Page 48 Revision 3.0.3
Figure 4-12: “Routed From” Drop Down Window
Users can select whether they want to include the voiceovers onto either the Aux or Clean output.
They would need to checkmark the VO1- VO5 boxes to allow the audio to include VO1 – VO5.
Program Keyer 5 O/P will always include Voiceovers as this represents the PGM output of the mixer.
The other Program O/Ps allow for configuration of which voiceovers are included/mixed. This
functionality is not
currently supported for the Preset O/Ps.
4.4.6. Using Aux for Audio Monitoring
When Auxiliary Ouptut is selected for configuration in the Video Tab an additional option will become
available. This is option is called “Use Aux for Audio Monitoring”.
Figure 4-13: Configuring the Audio Monitoring Routing