Fibocom G510 - Page 100

G5/G6-Family AT Commands User Manual Page
100
of
243
+CMGL:
<index>,<stat>[,<alpha>],<length><CR><LF><
pdu>[<CR><LF>
+CMGL:
<index>,<stat>[,<alpha>],<length><CR><LF><
pdu>[…]]
Or
+CMS ERROR: <err>
Test
+CMGL=?
+MMGL=?
+CMGL: (list of supported <stat>s)
The Test
command lists
all the
supported
<stats>
The following table shows the +CGML/+MMGL parameters.
<Parameter>
Description
<index>
1-352 Index of message in storage.
<stat>
Status of message in memory:
PDU
mode
Text mode
Description
0
“REC
Received unread messages
1
“REC READ”
Received read messages
2
“STO
Stored unsent messages
3
“STO SENT”
Stored sent message
4
“ALL”
All messages
<oa/da>
Original/destination address.
<data>
Message contents in text mode
<length>
In PDU mode: Size of message, in octets, excluding SMSC data. In TEXT mode:
Number of characters included in <data>.
<pdu>
Message header and contents in PDU mode format. See description in “+CMGR,
Read Message”.
<toda/toda>
Type of origination address / destination address