Fibocom G510 - Page 30

G5/G6-Family AT Commands User Manual Page
30
of
243
Test
AT+CRSM=?
+CRSM:
(list of
supported<command>s),
(possible <file_id>s range
value),(possible <P1>
range value), (possible
<P2> range
value),(possible
<P3>range value),
OK
or:
+CME ERROR: <err>
The test command returns the
possible ranges of CRSM
Parameters.
The following table shows the +CRSM parameters.
<Parameter>
Description
<command>
Integer type. Command passed on by the ME to the SIM.
176 Read BINARY
178 Read RECORD
192 Get RESPONSE
214 Update BINARY
220 Update RECORD
242 STATUS
<file_id>
Integer type. This is the identifier of a elementary data file on SIM.
Mandatory for every <command> except of STATUS.
<P1>,<P2>,<P3>
Integer type. Parameters passed on by the ME to the SIM. These
parameters are man- datory for every command, except GET RESPONSE
and STATUS.
READ BINARY
<P1> Offset high (0...255)
<P2> Offset low (0...255)
<P3> Length (0...255)